![]() password for user must be at least 8 characters, contain capital letters and numbers Configure user/password network information via ipmitool using the following parameters.Configure iDRAC in BIOS as per iDRAC options in the BIOS configuration (above).Note configuration details on asset record sheet.exit this screen by pressing ENTER, not ESC (which cancels changes) Enter System BIOS and configure the following:.Power on and press F2 to enter 'System Setup'.Profile 'Cluster Slave' BIOS configuration Ships with iDRAC8 express (shared IPMI LAN port, no KVM-over-IP) or iDRAC enterprise with dedicated port.24 DIMM slots requires 1 DIMM to boot max of 1.5TB RAM (24 x 64GB) slots 8-16 require CPU2 to be installed DIMM slot enumeration printed on chassis lid underside and matches PCB printing.GPU kit available (factory fit only) which can support 2 x passive 335W GPUs, leaving 3 x low-profile slots available. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |